Network Media Streaming Device

Model: VIEW Lite Controller CJ100

Part #: 910-0100-003

Lowest priced AV over IP streaming solution
JPEG2000 codec standard technology
Very low end-to-end latency of around 1.5 frames
High bandwidth requirement of around 850 Mbps
4K60 resolution with 4:2:0 color space support

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

VIEW® Lite is the newest and most economical addition to our AV over IP Streaming line. It provides essential functionality that meets the full needs of simple AV over IP applications while simultaneously delivering superb priceto-performance value.

VIEW Lite is a JPEG2000 compression technology based solution, with very low latency at about 1.5 frames, endto-end, with resolutions of 4K60 with 4:2:0 color space; and 4K30 and 1080p60 with 4:4:4 color space support for ultra high-quality live video streaming and distribution applications over a dedicated IP network.

Lowest priced AV over IP streaming solution
JPEG2000 codec standard technology
Very low end-to-end latency of around 1.5 frames
High bandwidth requirement of around 850 Mbps
4K60 resolution with 4:2:0 color space support
4K30, 1080p60 resolution with 4:4:4 color space support
HDCP for content protection
USB HID control through keyboard/mouse
IR and RS232 control
Local loopback output
PoE and DC power
Applications:
Corporate
Education
Hospitality
Entertainment
Transportation
Houses of worship

Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 1 Amps
DC Voltage: 12 Volts
Depth: 5.46 in
Height: 1.02 in
Width: 3.62 in
Product Weight: 0.84 lbs
Control:
•Serial RS232 Port:
•RS232 Pins TX, RX, G are used for device troubleshooting only
•Pins G, RX, TX are used for controlling, configuring and managing system
•Pins G, 12V are used for providing a 12VDC 0.5A output
•LAN1 (AV/PoE):
•RJ-45 Ethernet jack with PoE support
•IEEE 802.3AF PoE PD standard
•10/100/1000Mbps Ethernet port
•Connects to a switch for communication with encoders and decoders on the same network
•LAN2 (C):
•RJ-45 Ethernet jack without PoE
•Used for 3rd-party controller controlling, configuring and managing system
General:
•Reset: Factory reset by pressing the button continuously for 5 seconds

VIEW Lite Encoder EJ100 - Network Media Streaming Encoder

Network Media Streaming Device 605780 kb - Data Sheet

Project List

Suggested Products

IPTV Distribution Encoder

by VITEC