Zum Wireless Wall-box Switch, Red Smooth
Model: ZUMMESH-5A-SW-RED-S
Part #: 6508312
- Zum™ wireless wall-box switch
- Pair and play with Zum occupancy sensors or vacancy sensors
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Single rocker switch and status LED
- Controls switched lighting loads
A wireless wall-box switch for 100-277 Volt lighting control in a Zum™ commercial lighting system.
The Zum™ wireless wall-box switch (ZUMMESH-5A-SW) provides control of a single switched 5 Amp, 100-277 Volt lighting load. It features a single rocker switch to enable simple on/off switching. Standard gang-box installation allows one or more units to be installed in a 3-1/2 inch (89 mm) deep electrical box.
Built-in Zum Mesh wireless technology affords easy “pair and play” integration as part of a complete Zum commercial room lighting system. Energy-saving options are available to enable occupancy or vacancy sensing, and centralized monitoring and management.
Pair and Play
Designed with flexibility and ease-of-use in mind, Zum switches are pre-programmed with “pair and play” functionality. An installer can simply install the switch in a room along with Zum occupancy sensors or vacancy sensors, set up the room with a few quick button taps, and then use the switch to control the lights in the room – no programming required! Room setup can also be accomplished using the Zum app if the room is equipped with a Zum Network Bridge. The Zum Network Bridge also enables centralize monitoring and management via a Zum Floor Hub and Zum Wireless Gateway.
Zum Mesh Wireless Technology
Ultra-reliable Zum Mesh wireless technology provides steadfast peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways. Employing a Wi-Fi® friendly 2.4 GHz peer-to-peer mesh network topology, nearly every Zum Mesh device acts as an “expander,” relaying wireless commands directly between Zum Mesh devices to ensure that every command reaches its intended destination without disruption.
- Zum™ wireless wall-box switch
- Pair and play with Zum occupancy sensors or vacancy sensors
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Single rocker switch and status LED
- Controls switched lighting loads
- Rated 5 Amps at 120-277 Volts AC
- Flying lead wiring connections
- Standard 3-1/2 inch (89 mm) deep electrical box installation
- Matching decorator-style faceplate available separately
- Meets CEC Title 24 energy efficiency standards
- Meets ASHRAE 90.1 energy efficiency standards
- Meets UL 916 standard for energy management equipment
- ICC International energy conservation code compliant
- Spec Sheet available - Yes
- Depth: 1.80 in
- Height: 4.13 in
- Width: 1.75 in
- Load Ratings:
•Switch Load Types: LED, fluorescent ballast, incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, high-intensity discharge - Connections:
•Hot: (1) 16 AWG Class 1 flying lead, black, line power input
•Neutral: (1) 16 AWG Class 1 flying leads, white, neutral
•Ground: (1) 16 AWG Class 1 flying lead, green, ground
•Switched Load: (1) 16 AWG Class 1 flying lead, red, switched load output - Product Weight: 0.31 lbs
- Active Power: 1 Watt
- Color: Red
- Certifications: UL, FCC
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 5 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 277 Volts
- Construction:
•Composition: Plastic housing and front face with metal bracket
•Mounting: Mounts in a 1-gang (or larger) 3-1/2inch (89mm) deep electrical box (not included)
•Faceplate: Requires a decorator-style faceplate - Controls and Indicators:
•Switch: (1) 3-Position rocker switch (spring return to center); press up to turn the lighting load on, press down to turn the lighting load off; also used for room setup and factory reset
•Status: (1) Green LED, indicates the lighting load is turned on; also used for room setup and factory reset - Wireless Communications:
•RF Transceiver: 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
•Zum Mesh Range (Typical): 50ft (15m) indoor to nearest peer-to-peer mesh network device(s)
•Subject to site-specific conditions and individual device capabilities
•Note: A maximum of 32 Zum Mesh wireless devices is permitted per room
Acuity Audiovisual
9301 Corporate Circle
Manassas, VA 20110
USA
7033616080
https://acuityav.com/