Terminals - HDMI IN:
HDMI 19-pin x 1 (Compatible with HDCP, Deep Color)
Terminals - DVI-D IN:
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Terminals - MULTI PROJECTOR SYNC IN:
BNC x 1
Terminals - MULTI PROJECTOR SYNC OUT:
BNC x 1
Terminals - SERIAL IN:
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals - SERIAL OUT:
D-sub 9-pin (male) x 1 for link control
Terminals - REMOTE 1 OUT:
M3 stereo mini-jack x 1
Terminals - REMOTE 2 IN:
D-sub 9-pin (female) x 1 for external control (parallel)
Terminals - LAN:
RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
Terminals - DIGITAL LINK/LAN:
RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP, Deep Color)
Dimensions (W x H x D) (inch):
650 x 185*3 x 440 mm (25 19/32? x 7 9/32?*3 x 17 5/16? ) (Without lens) (Not including protruding parts)
Operating Environment:
Operating temperature: 0–45 °C (32–113 °F)*5; Operating humidity: 10–80 % (no condensation)
Applicable Software:
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Note:
1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [2], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 With legs at shortest position.*4 Average value. May differ depending on the actual unit. *5 Light output is limited at operating temperatures higher than 30 °C (86 °F), and projectors cannot be operated at altitudes higher than 2,700 m (8,858 ft) above sea level.
Terminals - REMOTE 1 IN:
M3 x 1 for wired remote control
Terminals - USB:
USB Connector (Type A) x 1 (Output 5 V/2 A)
Center-to-corner zone ratio:
0.9
Filter:
Included (Estimated maintenance time: approx. 20,000 hours)
Terminal - RGB In:
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)